10 Amp AC power cord used mainly to power monitors from the PC’s IEC output. Fitted with female IEC-C13 and male IEC-C14 connectors. Electrical Safety Authority Approved.
Modular reducers are inserted into a modular socket to reduce the size to suit a smaller modular plug whilst at the same time ensuring correct pin alignment. 8 position to 6 position and 6 position...
PVC boots for 8 position RJ45 modular plugs to suit 6mm diameter Cat-5E or Cat-6 cord.
Ideal for providing extra strain relief and easy colour coding of patch cords.
This adaptor replaces the original lid of an existing 610 or 611 socket, allowing another 610 or 611 to be stacked on top.
All wiring is fed through internally.
BNC connector for use with keystone patch panels, flush plates or surface boxes.
Front and rear BNC connectors for easy CCTV camera or RGB hook-ups.
Specification Sheet
Suitable for use with keystone wall plates, surface boxes and patch panels.
Can also be fitted to Australian HPM and Clipsal plates by using an adaptor.
Terminated with 110 or Krone impact tool...
Suitable for use with Keystone flush plates, surface boxes and Cat-6A shielded keystone patch panels.
Can also be fitted to Australian HPM and Clipsal flushplates by using an adaptor.
Terminated...
For stripping RG6/U and RG59/U coaxial cables.
3 blades ensure accurate stripping length of each cable section.
Built-in hex screws for accurate depth-of-cut adjustment for each blade.
Preset...
For stripping RG6/U, RG58/U and RG59/U coaxial cables.
3 blades ensure accurate stripping length of each cable section.
Built-in hex screws for accurate depth-of-cut adjustment for each blade...
Professional CCTV tester with advanced 90mm (3.5 inch) colour LCD monitor.
Features include video testing, PTZ controller, video signal generator, LAN Cable testing, PAL/NTSC multi-system colour...
Australian blank flush plates used for custom-mounting sockets and jacks or for covering disused mounting hardware.
The 2-piece design has a separate back plate and cover, allowing cover to be...
These precision hand crimp tools employ a ratchet action ensuring correct crimping pressure is applied for reliable, trouble-free compression of our P0720 series water-proof BNC, RCA, PAL and F-type...
Our premium Australian flush plates to accept our premium Voice-Grade, Cat-5E or Cat-6 IDC jacks.
Also compatible with other standard Australian mechanisms and jacks including F-connectors etc...