Description
13mm deep block for surface mounting standard Australian flush plates.
Suits our P4600 series flush plates and most other standard Australian switch plates.
Supplied with screws for fitting flush plate.
Dimensions 118(W) x 75(H) x 13(D)mm.
Specification SheetRelated Products
Datamaster
Blank Aust Flush Plate - P4600WHI
Australian blank flush plates used for custom-mounting sockets and jacks or for covering disused mounting hardware.
The 2-piece design has a separate back plate and cover, allowing cover to be...
P4600WHI
Datamaster
2-Port Aust Flush Plate - P4602WHI
Our premium Australian flush plates to accept our premium Voice-Grade, Cat-5E or Cat-6 IDC jacks.
Also compatible with other standard Australian mechanisms and jacks including F-connectors etc...
P4602WHI
Datamaster
35mm Aust Mounting Block - P4622WHI
35mm deep block for surface mounting standard Australian flush plates.
Suits our P4600 series flush plates and most other standard Australian switch plates.
Breakouts on all sides allow for cable...
P4622WHI
Datamaster
Aust C-Bracket Plaster - P4631
Galvanised metal bracket for fitting standard Australian flush plates into plaster board.
Wall lugs are factory set to suit 12mm thick plaster board but can be adjusted to suit 6mm thick fibro...
P4631
Datamaster
HDMI Aust Or Keystone Suits Aust Or Keystone - P4659-014
HDMI connector for digital audio/video connections.
HDMI connectors on front and rear for easy HDMI cable hook-ups.
Universal design allows compatibility with our P4600 series Flush Plates, most...
P4659-014
