Clearance

Flat 6 conductor Coiled cord - Black Fitted with modular plugs. Can be supplied with any tail lengths, other connectors or unterminated if specified.

8P8C Shielded, Round, Half Shield Solid - Bulk 8 position half-shielded modular plugs for connection to round shielded cable. Plugs for stranded or solid conductors with round or flat cord entry are stocked. Plugs with 50μ”,...

4 conductor line cord with 6P4C RJ11 modular plugs on each end. Standard wiring is cross-over to suit most voice applications. Various lengths and colour combinations are available to special order.

4 conductor line cord with 6P4C RJ11 modular plugs on each end. Standard wiring is cross-over to suit most voice applications. Various lengths and colour combinations are available to special order.

4 conductor line cord with 6P4C RJ11 modular plugs on each end. Standard wiring is cross-over to suit most voice applications. Various lengths and colour combinations are available to special order.

Datamaster® Cat5e UV Stablised Shielded Patch Cable All Datamaster Network Patch Cables are Fluke® tested and are manufactured to exceed Australian standards. Datamaster's Patch Cable reduces the amount of crosstalk between the wires within the...

The 616M combines a 605 plug and a 610 socket, with either 6P4C (RJ11) or 8P4C (RJ45) modular socket. Updated design has front entry modular socket for easier use with side mounted wall sockets. Parallel wiring and mode-3 wiring versions are available...

Modular Coiled Handset Cords Standard 4 conductor coiled cord fitted with 4P4C modular plugs. Can also be supplied with any tail lengths, other connectors or unterminated if specified.

Standard BT/NZ telephone line wall socket. Up to 6 conductors can be connected using screw terminals. Spring-loaded socket cover prevents intrusion of dust and moisture. White in colour.

Two devices with modular plugs can be connected to one modular socket using these modular double adaptors. Standard wiring configuration is straightthrough. Special wiring configurations are also available.

Similar to the standard 6 position modular plug but has a long body as required to mate with deeply recessed modular sockets. Plugs with 50μ”, 30μ” or 15μ” gold plated contacts are available. Packed in bags of 20, 50, 100 or...

Generally used for termination of coiled handset cords. Plugs with 50μ”, 30μ” or 15μ” gold plated contacts are available. Packed in bags of 5, 20, 50, 100 or bulk. Plugs for stranded or solid conductors with round or flat cord...

  Specification Sheet

Flat multiconductor cables are used in applications where a low profile is required. This is often the case for under carpet installations. The MCF product range is used to connect telephones, modems and emergency lighting. It can also be used for...

Flat multiconductor cables are used in applications where a low profile is required. This is often the case for under carpet installations. The MCF product range is used to connect telephones, modems and emergency lighting. It can also be used for...

Flat multiconductor cables are used in applications where a low profile is required. This is often the case for under carpet installations. The MCF product range is used to connect telephones, modems and emergency lighting. It can also be used for...

Used to carry CCTV video signal and power feed over Cat-5E or Cat-6 cable. Transmits colour video up to 400 metres and 12V or 24V power feed up to 250 metres. Integrated surge protection. Male BNC for video connections, male/female barrel plug/socket...

One piece double adaptor fitted with one male BNC plug and two female BNC sockets. 180 ° “Y” configuration.

10 Amp AC power cord used mainly to power monitors from the PC’s IEC output. Fitted with female IEC-C13 and male IEC-C14 connectors. Electrical Safety Authority Approved.

10 Amp AC power cord used mainly to power monitors from the PC’s IEC output. Fitted with female IEC-C13 and male IEC-C14 connectors. Electrical Safety Authority Approved.