DC Conversion Cord 2.1mm to 2.5mm Reverse Polarity/Crossover

In stock
Ships From Warehouse

Product Description

Output Plug Converter Cords

  • Output cord converter with injection moulded DC plug and socket.
  • Convert the existing output plug of a power supply to a different type, size or polarity.
  • Cross-over version reverses polarity from centre-positive to centre-negative or centre-negative to centre-positive whilst either maintaining existing plug type and size or converting to another.
  • Standard length is 130mm overall and standard construction is 20AWG.

Other Configurations are:

  • K3621-S13 2.1mm ID 1.3mm ID Straight-thru Black Round
  • K3621-S25 2.1mm ID 2.5mm ID Straight-thru Black Round
  • K3621-SJ2 2.1mm ID EIAJ-02 Straight-thru Yellow Round
  • K3621-X21 2.1mm ID 2.1mm ID Cross-over Red Round
  • K3621-21R 2.1mm ID 2.1mm ID Right-angle Straight-thru Black Figure-8
  • K3621-X25 2.1mm ID 2.5mm ID Cross-over Green Round
  • K3621-150 2.1mm ID Blunt Cut Round
  • K3625-S21 2.5mm ID 2.1mm ID Straight-thru Black Figure-8
  • K3625-X21 2.5mm ID 2.1mm ID Cross-over Green Figure-8
  • K3625-X25 2.5mm ID 2.5mm ID Cross-over Red Figure-8
  • K3625-150 2.5mm ID Blunt Cut Round

Other Details

CAT #:
2.1mm ID
2.5mm ID

Warranty Information


Limited Lifetime Warranty

Warranty begins from purchase date of the item (invoice date). For warranty/service issues, please contact your place of purchase. Please hold on to your original receipt. The warranty covers any production and material defects of bona fide purchased product. The following is NOT COVERED by the warranty: Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage. Must be installed by a qualified installer, no DIY. No abuse. Incorrect installation of product. Tampered outer casing. Transportation costs for service call. Replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement.