HPM/Sq Bezel Whi - P4592

Adaptor bezels to fit keystone jacks into Australian Clipsal or HPM brand flush plates.

BNC connector for use with keystone patch panels, flush plates or surface boxes. Front and rear BNC connectors for easy CCTV camera or RGB hook-ups.

Australian blank flush plates used for custom-mounting sockets and jacks or for covering disused mounting hardware. The 2-piece design has a separate back plate and cover, allowing cover to be...

Suitable for use with keystone wall plates, surface boxes and patch panels. Can also be fitted to Australian HPM and Clipsal plates by using an adaptor. Terminated with 110 or Krone impact tool...

HORN SPEAKER 15-Watt horn speaker suitable for connection to the K3507 Tone Ringer & K3509 Universal Loud Sounding Alarm. The 350mm figure-8 cable has tinned ends for easy connection. IP4,...

These precision hand crimp tools employ a ratchet action ensuring correct crimping pressure is applied for reliable, trouble-free crimping of coaxial cable plugs. Tool T0038 suits our BNC RG59/U...

These precision hand crimp tools employ a ratchet action ensuring correct crimping pressure is applied for reliable, trouble-free crimping of coaxial cable plugs. Tool T0038 suits our BNC RG59/U...

Our premium Australian flush plates to accept our premium Voice-Grade, Cat-5E or Cat-6 IDC jacks. Also compatible with other standard Australian mechanisms and jacks including F-connectors etc...

A 3-core flex fitted with right-angle 3 pin Australian mains plug with insulated pins compliant with AS/NZS3112 and an IEC-C13 connector. Electrical Safety Authority Approved.

As used on most computers and office equipment. Fitted with IEC-C13 connector and Australian 3-pin mains plug with insulated pins compliant with AS/NZS3112. Electrical Safety Authority Approved.